Cheap Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, 2-1/2" Solder End

This class 125 Apollo Valve 102S series bronze gate valve has a non-rising stem and solder end connections on both ends. The bronze body, solid wedge gate, and screw-in bonnet provide higher strength and resistance to corrosion than brass. This valve has a non-rising stem that stays fixed in place when the gate is raised or lowered for low clearance or underground use, and the graphite internal packing helps prevent the valve’s stem from leaking. This gate valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum

Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, 2-1/2" Solder End

qwqwqw/B006QPZTPY/ttttt gggggg/41lzuIgYuxL.jpgqqqq

==>> Check Current PRICE <<==ccccc

Apollo 102S Series Bronze Gate Valve, Features :

• Made of bronze for higher strength and corrosion resistance than brass
• Non-rising stem stays fixed in place when gate is raised or lowered for low clearance use
• 200 pounds per square inch (gauge) (psig) for cold working pressure (CWP) and 125 psig for steam working pressure (SWP)
• Solder end connections on both ends for a semi-permanent connection to a piping system
• Top-mounted iron hand wheel for lowering and lifting the gate

qwqwqw/B006QPZTPY/ttttt ccccc

Apollo 102S Series Bronze Reviews,

9 out of 10 based on 77 ratings